Galvanised Spare wheel lifts

The parts for the spare wheel lifts are back from the galvanizers,  now I have to work out how to lift them on to the back of the truck !!

Rear Body Fin

The main reason for this "Fin" apart from the fact that it looks cool!   Is to protect the winches for the spare wheel mounts from excessive water.

The spare wheels will stick out 550mm from the rear of the body.

It also serves as a mounting point for the High level reversing lights and

the rear camera for the 360 deg look down camera system.

It's sealed and sanded now ready for paint.

Water Tanks

The truck will have two water tanks,

Tank one is 700Lts  and will be used for Shower (inside and outside), Sink,
Toilet flushing,  Washing Machine

Tank two will be used for drinking water only. Via a filter system.

You can see in the picture below:

Inspection Hatch.

The level sensor (900mm long)

Float switch to control the automated fill valve

Fill Valve

Air Bleed.