Thursday, 5 January 2017

It's started, The body

This is just the start of the body structure,  the base is made from 80mm x 80mm steel box section, on this will be a frame of 40mm x 40mm steel box section.

The outside of this will be clad with 3mm fiberglass then 40mm of insulation in the cavity and a 12mm plywood inner wall, that will then be covered with a finishing board.

The floor will have 80mm of insulation and be 18mm of  recycled plastic sheet, it's a bit like chipboard but made of plastic chips, so it is totally waterproof and rot proof.